In article <6a867620.0402241934.342846e4.TakeThisOut@posting.google.com>,
julious_cesar2000.TakeThisOut@yahoo.com.mx (Julious Cesar) wrote:
> I can access the Internet via the Airport (Wireless) with my iBook.
> But when I tried to connect my PC (running Red Hat Linux)to the other
> available port on the Airport I cannot get the PC to see the Internet.
>
> Then, I went to AirPort Admin Utility to give the premissions and this
> is what I got:
> "The AirPort Admin Utility was unable to read the configuration of the
> selected base station.
> An error occurred while reading the configuration."
>
> Any suggestions ?
> Any ideas ?
>
> Has someone had the same problem ?
>
> I did this months ago with other PC's and everything went fine. For
> some reason the Airport can not be accessed.
>
> Julious
I'm guessing here. So take my suggestions with a "Grain of Salt"
Have you tried power cycling the Airport base station. Maybe it just
needs to be restarted.
If restarting the base station does not do anything. You could try a
hard reset
WARNING: a Hard reset will return the base station to it Factory
settings and if you can not access it after that, you might also not
have internet access for your iBook either.
Before attempting this, make sure you have your manuals for the base
station. If you have misplaced your manual, find an on-line copy a the
Apple web site.
With the manual in hand, stick a paperclip in the reset hole and press
the button for about 5 seconds.
Now read the manual on how to setup your base station from scratch.
Bob Harris<!-- ~MESSAGE_AFTER~ -->
FAQ
Profile
Private Messages
Log in
