ab dick 360 question?

I cant get the upper rollers to contact the plate properly. This leads
to a very dry plate. Iam using polyester plates. The lower adjustable
ink roller is fine, the press is level and the water adjustment lever
is set fully forward. Both rollers are in the on position. I have been
running over 100,000 impressions monthly for the last 1.5 years. The
upper adjustable roller has a center portion that can be removed, does
it go in one way only? Also when adjusting the 2 rollers should they
come towards each other or go in different directions? www.printfreemaps.com

Danny B wrote:
> I cant get the upper rollers to contact the plate properly. This leads
> to a very dry plate. Iam using polyester plates. The lower adjustable
> ink roller is fine, the press is level and the water adjustment lever
> is set fully forward. Both rollers are in the on position. I have been
> running over 100,000 impressions monthly for the last 1.5 years. The
> upper adjustable roller has a center portion that can be removed, does
> it go in one way only? Also when adjusting the 2 rollers should they
> come towards each other or go in different directions? www.printfreemaps.com
>
Sorry Danny , wrong NG

comp = computer
sys = system
mac = Apple Macintosh
printing = inkjet, laser, etc


I have never seen a NG for what you're asking.
misc.industry.printing appears to a dead NG

--reed ( ex-Multilith 1250 & Davidson 500 operator)